M2-S6510-48X8C Data Center Switch

The M2-S6510-48X8C is a high-performance box access switch of Micas Networks. It can meet deployment requirements of multiple network architectures, including the traditional L3 architecture and Spine-Leaf architecture. It also supports deployment of the Overlay network and construction of traditional enterprise data center networks and super-large cloud data center networks.

Highlights

Non-blocking Hyperscale Data Center Networks

Provides 48 × 10GbE ports and 8 × 100GbE ports

Data Center Overlay Networking

Supports VXLAN to meet the data center overlay networking requirements and enables the establishment of a logically layer-2 network on the layer-3 network.

RDMA-based Lossless Ethernet

Supports the RDMA feature and enables the establishment of lossless, low-latency data center Ethernet.

Cloud Networking Ready

Shared 32MB Buffer with burst absorption
Up to 288K MAC and 168K Host entries

Automated O&M/Monitoring Network

Supports In-band Network Telemetry to enable active pushing of switch status based on gRPC.
Supports the ZTP protocol to meet automatic deployment requirements.

Note: Available in standard* airflow

Specifications

Ports	48×10G SFP and 8×100G QSFP28
Switching Capacity	4.0Tbps
System Memory	5GB
Packet Buffer	32MB
Fans	4 (3+1 redundant, hot-swappable)
Airflow	Standard airflow

OS	HulkOS
CPU	CN7130-1200W
Packets/Second	1920 Mpps
System Storage	8GB
Power Supplies	2 (1+1 redundant, hot-swappable)
Max Power Consumption	300W

* Standard: Front to rear

Network Operating System

This product leverages HulkOS, a robust and secure operating system developed by Micas Networks for data center environments. With multiple versions and unique features tailored to each Micas Enterprise switch product, HulkOS ensures comprehensive functionality. Explore more about our offerings on the dedicated page at Micas Networks.

Learn more about the offers at the Micas Networks dedicated page.

Software Features

Layer 2 Protocols	802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) 802.3ad Link Aggregation Control Protocol (LACP) 802.1Q VLAN Tagging IGMP Snooping MLD Snooping Jumbo Frames (9216 bytes) 802.1ad Flexible QinQ VLAN Registration Protocol (GVRP) MLAG
IPv6	Routing protocols: OSPFv3, BGP4+, IS-ISv6, and RIPng Neighbor Discovery (ND) MLDv1/v2 PIM-SMv6 Path MTU Discovery (PMTUD) IPv6 tunnel: IPv4 over IPv6, IPv6 over IPv6 GRE tunnel ICMPv6, DHCPv6, DNSv6, SNMP v6, TCP/UDP for IPv6 IPv6 RADIUS ACLv6, IPv6 QoS Telnet/SSH v6 FTP/TFTP v6 NTP v6 Ping/Traceroute v6 VRRP for IPv6 IPv6 MIB support for SNMP
QoS	Up to 8 unicast queues and 8 multicast queues for each port ACL-based traffic classification Priority marking/remarking Multiple queue scheduling mechanisms: SP/WRR/DRR/SP + WRR/SP + DRR Congestion avoidance mechanisms, such as WRED and tail discarding
Virtualization	N/A
HA Design	GR for RIP/OSPF/BGP BFD DLDP Dual-link fast switching (REUP) Unidirectional link detection (RLDP)

Layer 3 Protocols	Routing protocols: OSPF, BGP, MBGP, IS-IS, and RIPv1/v2 32 equal-cost multi-path (ECMP) routes Weighted cost multi-path (WCMP) routes VRF IGMP v1/v2/v3 PIM-SSM/PIM-SM/PIM-DM Multicast Source Discovery Protocol (MSDP) VRRP Policy-based routing (PBR) Route map
Data Center Features	VXLAN EVPN VXLAN RDMA feature: PFC/ECN OpenFlow 1.3
Visualization	gRPC sFlow INT
Security Features	Network Foundation Protection Policy (NFPP) DDoS attack defense CPU Protection Policy RADIUS TACACS Plaintext-based and MD5 ciphertext-based authentication for OSPF, RIPv2, and BGPv4 packets DHCP Snooping IPv4/v6 packet filtering by standard ACL, extended ACL and VLAN-based ACL
Management Mode	SNMP v1/v2/v3 Telnet, SSHv1/v2 Console MGMT RMON FTP/TFTP NTP clock Syslog SPAN/RSPAN/ERSPAN ZTP NETCONF Configuration Rollback

Quality Certifications

Documentation

Datasheet

Configuration
Guide

Command
Reference

Hardware
Installation Guide

Certificate

Order Information

Switch

Model	Description
M2-S6510-48X8C-FA	48 fixed 25GbE SFP28 ports, 8 fixed 100GbE QSFP28 ports. 2 slots for power supply modules. 4 slots for fan modules. 2 power supply modules and 4 fan modules already included. Standard airflow is supported.

Fan and Power

Model	Description
M1EFAN II-F	Fan module, front-to-rear airflow.
PA550I-F	AC power supply module, front-to-rear airflow.